• 
  
• Physical Characteristics (Overall)

• Conductor  16 AWG, Solid, Bare Copper, 0.051” Diameter
• Insulation Material: Foamed High Density Polyethylene, 0.225” Diameter

• Outer Shield Materials:
• Layer Type Outer Shield Material Coverage (%)
• 1. Foil Aluminum Foil-Polyester Tape-Aluminum Foil 100 %
• 2. Braid TC - Tinned Copper 95 %
• 3. Foil Polyester Tape-Aluminum Foil 100%

• Outer Jacket: PVC - Polyvinyl Chloride, 0.320” Diameter
• Jacket Print: S-7244-1463 75 OHM LOW LOSS

• Mechanical Characteristics
• Operating Temperature Range: -30°C To +75°C
• Bulk Cable Weight: 59 lbs/1000 ft.
• Max. Recommended Pulling Tension: 111 lbs.
• Min. Bend Radius/Minor Axis: 3.250 in.

• Applicable Standards & Environmental Programs
• NEC/(UL) Specification: CMR
• CEC/C(UL) Specification: CMG
• EU Directive 2011/65/EU (ROHS II): Yes
• EU CE Mark: Yes

• Flame Test
• UL Flame Test: UL1666 Vertical Shaft
• CSA Flame Test: FT4

• Electrical Characteristics
• Impedance: 75 Ohms (+/- 3) @ 20°C
• Nom. Inductance: 0.091 (μH/ft)
• Capacitance Conductor to Shield: 16.2 (pF/ft)
• Velocity of Propagation: 83.00% (Nominal)
• Nominal Delay: 1.21 (ns/ft)
• Conductor DC Resistance: 4.00 Nominal (Ohms/1,000 feet @ 20°C)
• Outer Shield DC Resistance: 1.90 Nominal (Ohms/1,000 feet @ 20°C)
• Maximum Operating Voltage (UL): 300 V RMS
• Sweep Testing: 100% Sweep tested 5 MHz to 4.5 GHz

1794A